Great Scott Automotive, LLC
LD Alignment Tech Tool List
Below are the recommended tools to start with when new to the alignment business. These are only recommendations and may not represent all the tools needed to perform modern day wheel alignment.
1/2" Drive 50 ft lb Nut Runner
1/2" Drive Break Over Bar
1/2" Drive Extension Set
1/2" Drive Flex Head Ratchet
1/2" Drive Impact
1/2" Drive Impact Socket Set Deep (metric up to 32mm)
1/2" Drive Impact Socket Set Shallow (metric up to 32mm)
1/2" Drive Impact Swivels
1/2" Drive Torque Wrench ( up to 250 ft lbs)
10” Adjustable Wrench
3.5mm Nut Driver
3/8" Drive Extension Set
3/8" Drive Flex Head Ratchet
3/8" Drive Socket Set Deep (metric)
3/8" Drive Socket Set Standard (metric)
3/8" Drive Torque Wrench
Air Hammer
Air Hammer (chisel bit)
Air Hammer (hammer bit dished out in the middle)
Air Hammer (hammer bit)
Air Hammer (punch bit)
Dial Indicator
Digital Angle Gauge
Pipe Wrench (last resort / emergency use only)
Pliers (regular)
Pliers (side cutters)
Pliers (slip joint)
Pliers (vise grips)
PPE (Mechanics Gloves)
PPE (Safety Glasses)
Pry Bar (long)
Pry Bar (short)
Screw Driver Set
Set of Metric Ratchet Wrenches (up to 24mm - long)
Set of Metric Wrenches (up to 32mm)
Tape Measure
Toe Adjustment Hooks (5 piece set)
Torx Bit Set
Torx Bit Set (inverted)
Trim Bone